About this Blog

Hello everyone,
My name is TheLion. I am an Audiophile and a 'Walkman' collector. I have started this blog for all those who share the same interest. On this blog, I will share my love with the world of Personal Stereos. This is limited only to Personal Stereos and Minidisc Players and maybe some other unique gadgets. The common rule with all those Personal Stereos is their State-of-the-Art; High-Quality Sound, Excellent build and Unique design - in other words, Personal Hi-Fidelity Analog music players for the soulful man. The main interest (but not limited to) in Walkmans is AIWA Personal Stereos from their early years' product line from 1984 to 1991. The main interest in Minidiscs (but not limited to) is Sharp Minidiscs. I will post pictures of rare Walkmans and Minidiscs with information. Thank God for making all this possible, I hope you all will enjoy my blog.
Note: I started this blog in 2011 to offer a unique perspective for educational purposes in the world of personal Stereo. I will gladly share most of the info regarding the gadgets displayed on this blog. However, Since this blog consumes a lot of time and great efforts to assemble and maintain as current as possible, I do not get paid or gain (thru advertisement) any money to do so. Hence, I do it in my free time. Therefore, If you enjoy this one of a kind comprehensive blog Please consider a nice donation according to your enjoyment of this blog. your kind support will surely make this blog alive & Kick for years to come, it will also entitle you to a free technical support ie; questions, inquiries, and requests. please drop me a line and I'll be happy to assist ThePersonalHiFi@Gmail.com. Thank you TheLion, September 2017.

Flash news

..... . . . Site Last Updated [August 22nd, 2025] Sharp Page updated with brand information....... Sharp JC-N7 Radio Cassette Player with EQ... . . ., Sharp JC-7 Cassette Player with Tuner and EQ....... Sharp MD-J MD-ST880 MDLP Player With Dolby Headphone System.....Sharp JC-N6 TV/FM/AM Radio Cassette Player with EQ..... . . Sharp JC-R7 Radio Cassette Recorder with EQ... .....Coming up Soon.... . .Victor CX-V9.... AIWA HS-RX50.. . ... . . ... . . . Please Stay Tune For More.... . . . . .

Tuesday, October 13, 2009

Is It all in your Headphones? - Part II

Greetings,


Is it all in your headphones? - Part two




CROSSFEED



Since the release of the Walkman in 1979, modern headphones have been particularly widely sold and used for listening to stereo recordings, there is subjective debate regarding the nature of their reproduction of stereo sound. Stereo recordings represent the position of horizontal depth cues via volume and phase differences of the sound in question between the two channels (known as stereo separation). When the sounds from two speakers mix, they create the phase difference the brain uses to locate direction.(See illustrations)


Through most headphones, because the right and left channels do not combine in this manner, the illusion of the phantom center is lost. In normal listening through loudspeakers, right ear receives signal from right loudspeaker and then, a fraction of a millisecond after, it also receives signal coming from the left speaker. While listening with headphones, you only get right signal to your right ear and left signal to your left ear. The crossfeed function (software) is to send to the opposite ear the other signal delayed and filtered (same as loudspeakers signals would do). When using crossfeed, the sound is really turned around you externally, not going through your head.



Most songs are recorded only for loudspeakers listening so they should benefit from crossfeed. Some Audio enthusiasts do make crossfeed music tapes in order to enjoy its benefits on a personal stereo.


BURN IN


Few years back in time before the age of digital, every piece of equipment in the analog world had to be warmed up; it is a very well known process. Any piece of hardware needs to be stressed or 'benched' to get the best results out of it. Fresh out of the box, a new pair of shoes may not be as comfortable and good as a well used pair. A new car will not reach its peak point unless you drive it for some time. A similar situation is for a pair of headphones; they may not sound as good as a well used pair, as the designers have intended.

Burn-in is the process for exercising new headphones. The main purpose of the burn-in process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Most audiophiles agree that the sound quality will be noticeably improved after burn-in. The benefit of burn in has always been controversial. Some people say that there is evidence that proves it while others say that there is evidence to disprove it.

Often, people want their headphones to sound the way that they are intended fresh out of the box. Most people choose to listen to their headphones as they change over the burn in period. Others don't want to wait for days or weeks of regular use, so the choice is to expedite burn in by getting the process over with in the first week of ownership.  The physical process is that the diaphragms loosen up through use and eventually reach a point that could be considered final.  Most headphones require at least 56 to 150 hours of burn-in time to reach their optimal performing state. Many will recommend approximately 200 hours for most headphones. Some recommend as many as 336 hours or more. Different headphones may take longer than others for a so-called "complete" burn in, and there is no exact or set length of time for burn in. It is best to use your ears to listen for changes to decide when you should stop the burn in process.

There are different ways to burn-in your headphones (or earbuds). The most common ways include running a variety of music, white noise, pink noise, frequency sweeps, etc. through the headphones at a medium volume. (Please note: too high of a volume can cause damage to, or even burned them out!). Music is an obvious burn-in candidate and works quite well if you have a broad range of musical genres in your playlist. Playing only one type of music however will not exercise and stress the entire audio spectrum. The best thing to do may be to plug your headphones into a player, set the volume to medium, and let your music play for up to 5-9 hours everyday (perhaps, while you are at work or sleeping). After that, your headphones will most likely sound their best and you can hear the difference. Note that you don't have to listen the whole time.



HEADPHONES AMPLIFIERS

Headphone amplifiers or cMoy are commercially available separate devices, sold to an enthusiastic audiophile market. These devices allow for higher possible volumes and greater audio clarity than the smaller, cheaper amplifiers that are used in most portable players. Most headphone amplifiers provide power between 8 mW and 3W depending on the specific headphone being used and the design of the amplifier. Certain high power designs can provide up to 6W of power into low impedance loads.


How do they work?

Effectively, a headphone amplifier is a small power amplifier that can be connected to a standard headphone jack or (usually) the line output of an audio source. The headphone amplifier improves the sound quality by increasing the amount of power available to move the transducer, increasing the control that the source has over just where the transducer is in space. A great headphone amplifier is one that makes headphones sound better than you thought they were.


Types of Headphone amps
There are two main types of Headphone amps: plain amp and Hybrid amp.
The plain amps are simple with just a volume control and input/output jacks for plain audio players and then there is the Headphone Amps w/ USB DAC which is the same amp with a Digital Analog Converter built into it for use with laptops or netbooks. It basically allows you to bypass the sound card in your laptop. Not only is the quality of most USB DAC's a lot better than the sound cards found in most laptops, but it actually takes the sound card out of the system, gets it away from all that electronic interference altogether.





DIGITAL Vs. ANALOG

We are living in a digital age. We are surrounded with bits and bytes, Zero's and One's, CD's, blue-rays and Pixels all advanced and minimized. but there is one dinosaur in all this advanced technology - the loudspeakers and his little brother the headphones. This is the only lonely analog part in our whole hi-fi world. The man and the loudspeakers are very much the same - analog machines in a digital world. Without us there will be no one to play with those gadgets or enjoy them, the same with the loudspeakers, without them we won't be able to hear music. Therefore, speakers or headphones cannot be digital or digital ready as manufactures call them to increase sales, because they are fundamentally an analog mechanical piece of hardware.

There is an old debate among audiophiles which is actually the one that signatures the sound quality? Is it the source, or is it the drivers themselves? Assuming of course, that the source is a Hi-Fi source and is capable of reproducing a wide range and a great Frequency response; will the loudspeakers or headphones have the ability to provide the same sound quality or overpass it? In other words is it all in your headphones?

 

Basically, if your portable player actually provides a pretty good sound, some extra power from a good headphone amp can help you get a better sound by allowing you to connect to higher quality headphones that otherwise would be underpowered by the player.

Because of the charecteristics of analog, good sounding headphones can produce an excellent sound quality only if they use an analog amp to drive them. Unfortunately, as far as the technology goes (considering maximum bitrates) high quality sound from a digital hardware is very noticeably inferior to the good old analog.

I Own 2 kinds of headphone amps, One is an analog type which made by BioScienceGeek (BSG) and the other is digital the NuForce Icon Mobile. When you compare them both you can hear the great difference of digital vs. Analog. The BSG have far great warmer and detailed sound compere to the dull and cold harsh sound of the much smaller nuforce.



In conclusion is it all in your headphones?
The answer in my opinion is definitely YES; it is all in your headphones!
What do you think?


Thanks for your time.

All the best

TheLion

Monday, October 12, 2009

Is it all in your Headphones?



IS IT All in your Headphones?

Greetings to all,

Many times I have read about walkman enthusiast who complain about high quality players which sound poor, or are not what they expected. So I have decided to try to combine some tips and advice for those members who are not familiar with the world of Hi-Fi and walkmans or personal stereos, here goes:

So, when was the last time you were excited by a piece of music? Whether it was at a concert hall, a theater or your home system, surely the reason for that was the Hi-Fi source that the music was played on. Nothing can be more exciting than a clean and accurate frequency response of a good hi-fi system. We are not just satisfied with hearing music; we want to experience it too. The ability to experience pleasure from listening to music appears to be linked with the quality of reproduction. This in turn is linked with the ability to hear more of the music in greater detail. It is this pursuit of excellence that drives the quest for Hi Fi, to make the experience of music exhilarating!


The Question is: Can a Walkman or a portable stereo reproduce the same Hi-Fi quality as a home Hi-Fi system does? The answer lies in few factors which we will point out in this article.

The term Hi-Fi is a short for High Fidelity. Hi fidelity achieved by low distortion or noise. This achievement produces accurate Frequency response. To make your walkman or personal stereo sound great with all the bells and whistles; either you like low deep bass or crispy cymbals. The answer lies on the headphones.

Headphones are the central nerve system of any walkman.
The word headphone comes from Head-Phones. Meaning; they have a band or other arrangement to fit over the head unlike ear-phones or earbuds that are fitted directly in the outer ear. Not all headphones created equal. Some are good, some are worse, some are clean, some are distorted, some are colored and some are neutral.

This article is all about How to get the best sound quality out of your music player and your headphones, whether it's a Walkman, a Minidisc player, an mp3 player, or an Ipod.
When I started this article I didn't realize it will grow so much, so I have decided to split it in two parts (Well maybe three parts) So here we are.


In this article we will explain in general what are headphones?

1. Types of headphones
2. Cables and Plugs
3. Price vs. quality
4. Evaluate sound

Part 2
1. Crossfeed
2. Burn in
3. Headphones amps
4. Analog vs. digital



TYPES OF HEADPHONES


There are many types of headphones. The need for portability indicates smaller, lighter headphones but can mean a compromise in fidelity. Headphones used as part of a home hi-fi do not have the same design constraints and can be larger and heavier.

Generally, headphone form factors can be divided into four separate categories:
Over-the-ear, On-ear, earbud, and in-ear.

  1. Full size headphones also called Over-the-ear headphones(Circumaural) have circular or ellipsoid earpads that encompass the ears. Because these headphones completely surround the ear, Over-the-ear headphones can be designed to fully seal against the head to attenuate any intrusive external noise. Because of their size, Over-the-ear headphones can be quiet heavy.
  2. On-ear headphones (Supra-aural) have pads that sit on top of the ears, rather than around them.

This type of headphones generally tends to be smaller and more lightweight than Over-the-ear headphones, resulting in less attenuation of outside noise. They were commonly bundled with personal stereos during the 1980's with their unforgettable orange color.
Over-the-ear and On-ear-headphones both can also be further differentiated by the type of ear-cups:

Open-back headphones have the back of the earcups open. This leaks more sound out of the headphone and also lets more ambient sounds into the headphone, but gives a more natural or speaker-like sound and more spacious "soundscape" - the perception of distance from the source.

Closed-back styles have the back of the earcups closed. Depending on the model they may block 8-32db of ambient noise, but have a smaller soundscape, giving you a perception that the sound is coming from within your head. These types are mostly used as Studio monitors to prevent sound leakage to the mics.


  1. Earbuds or earphones are very small headphones that are fitted directly in the outer ear, facing but not inserted in the ear canal; they have no band or other arrangement to fit over the head. Such earphones are portable and convenient, but many people consider them to be uncomfortable and prone to falling out. Various models are available, most are cheap low low grade. They hardly provide any acoustic isolation and leave room for ambient noise to seep in; users may turn up the volume high to compensate, at the risk of causing hearing loss. Earbuds have commonly been sold with personal music devices since the early 90s.
  2. In-ear headphones (also called IEMs), like earbuds, are small and without headband, but are inserted in the ear canal itself.
They are sometimes known as canal phones. Price and quality range from relatively inexpensive to very high; The better ones are called in-ear monitors (IEMs) and are mainly used by audio engineers and musicians.
Canal phones offer portability similar to earbuds, block out much environmental noise by obstructing the ear canals, and are far less prone to falling out. When used for casual portable use they block out sounds which can be important for safety (e.g. approaching vehicles).

Types of Headphones
DENON Headphones Assembly



Driver type

Your musical taste is quite important when choosing headphones. They will help you determine the headphone driver type to select.
The driver produces the sound. Most headphones use dynamic drivers, which provide a full range of sound.

Moving coil driver, more commonly referred to as a "Dynamic" driver is the most common type used in headphones.
The operating principle consists of a stationary magnetic element affixed to the frame of the headphone which sets up a static magnetic field. The magnetic element in headphones is typically composed of ferrite or neodymium. The diaphragm, typically fabricated from lightweight, high stiffness to mass ratio cellulose, polymer, carbon material, or the like, is attached to a coil of wire (voice coil) which is immersed in the static magnetic field of the stationary magnet. The diaphragm is activated by the attached voice coil, when an audio current is passed through the coil. The alternating magnetic field produced by the current through the coil reacts against the static magnetic field in turn, causing the coil and attached diaphragm to move the air, thus producing sound.

In comparison, balanced armature drivers are smaller and more efficient. They're mostly used in in-ear canal phones. High or low frequencies may be clipped.


Some headphones use static drivers. Found in headphones that run $500 and up, static drivers offer the best sound. They require an external power source, which means they're not quite portable.



CABLES & PLUGS



Another important factor for excellent hi-fi sound is properties of cables & plugs. Most headphones nowadays have a gold plug tip. Most people automatically think that gold has to be better. Some claim those headphones sounds better and they conduct better.
But is that a fact or myth?

Most interconnects are shielded to reduce any RF (radio frequency) Interference.
Shielding generally decreases capacitance which is undesirable. High capacitance tends to roll off high frequencies so short cable is best.
In order to maintain flexibility and maintain low electrical resistance cables use many conductors.
Better cables often use two separate elements of shielding, braiding to guard against (RFI), and foil to reduce (EMI).
Insulation is necessary to stop the signal shorting out but the type of insulation has a significant effect on the sound.
Whereas most cables use PVC as insulation but it’s particularly poor as a dielectric.
Teflon (PTFE) is one of the best dielectrics available with its dielectric constant being 100 times better than PVC.
Oxygen Free Copper (OFC) is often used in better cables as a conductor and produces minimal signal loss whilst passing signals accurately.

Silver or silver plated is usually considered the best material for cable conductors. Silver content in solder is proven in to have better conductivity in radio frequency (RF) assemblies and superior for audio. Purity of silver and copper cables are often quoted in high end interconnects and result in purity of around 99.99%.




Gold plating is used for connectors because of its low oxidation properties; it makes a reliable connection that tends not to deteriorate over time. In that case the only practical reason for using gold is that it doesn't corrode; But considerably more expensive than silver.







PRICE Vs. QUALITY



Something to always keep in mind is the headphones simple equation which is:
Quality is always expensive but Expensive is not always quality. However high quality headphones could also be found in not so fancy name/built with a high price tag.

The truth is that consumers don't really care enough about audio sound quality to even think about it. Unfortunately the focus of today's digital consumers seems to be with visuals or Pixels. When it comes to video we are obsessed with the differences between 720p and 1080p, Similarly with digital cameras where we want to know how many mega pixels it is. Concerns about audio sound quality in today’s market seem to be as unimportant. Those consumers would be perfectly happy listening to music from the tiny speakers of handheld devices, radios, laptops...etc. Those consumers find the cheap headsets and earbuds that comes bundle with consumer products very satisfying.




EVALUATE SOUND QUALITY




Ideally, everyone would agree about what sounds great, but in reality, sound is at least somewhat subjective - people hear slightly different things. Beyond that, you have to decide what sounds good to you. Like speakers, headphones might emphasize different parts of the audio spectrum, and you might prefer one sound over another.
Headphones should feed you clear, accurate sound with sufficient volume. However, good Headphones makers design their products to sound pretty much the same as the source. Others color the sound and emphasize it, even premium Headphone makers are now focusing most of their efforts on making Headphones with “colored sound” which emphasize certain sounds in a way that makes some music sound better to some listeners; for example: extended bass is the most common type of sound coloration.

We should consider five main factors to be important when evaluating the sound of a new pair of headphones: Frequency response, Sound balance, Clarity or distortion, 
Sensitivity and finally Impedance.


Frequency Response:
Frequency response (aka Dynamic Range) Measured in hertz, frequency response is the range of frequencies that the headphones can reproduce effectively. (“Range” describes the Headphone’s ability to let you hear the most extreme high and low ends of the audio spectrum - technically, it’s called Frequency Response) The human ear perceives sounds in the 20 Hz to 20,000 Hz range. Outside that range, sounds are not audible to most human ears (except the occasional sound professional and of course, some "golden ear" audiophiles). Ultra-low frequencies less than 20Hz are more felt than heard. Look for headphones that cover as much of this range as possible. Smaller headphones that use balanced armature drivers often have trouble with lower frequencies.

If you like music with a lot of bass, pay attention to lower frequencies; you may need larger headphones with dynamic drivers. For jazz and classical music, midrange and high frequencies are more important factor.


Sound balance:
Sound balance refers to the Headphone’s relative levels of bass, treble, and midrange - whether the designers present sound neutrally by balancing these types of sound equally, or color the sound so that bass, treble, and/or mid's are emphasized. Over-exaggeration can make certain types of music sound distorted.


Clarity or distortion:
Clarity or distortion refers to the Headphone’s ability to reveal better detail or flaws in your audio. The better the Headphone, the more detail it reveals in all parts of the audio spectrum; many Headphones reveal only high-end detail and leave bass and mids duller.


Sensitivity (loudness):
Sensitivity is a measure of headphone efficiency in dBs SPL per milliwatt of input. A low number means that the headphones need more power to sound as loud as those which have a higher sensitivity. Headphones for portables need to be fairly sensitive because of the lower power output of portable stereos.
Modern dynamic headphones have sensitivity ratings of 90 dB or more. When shopping for portable headphones, look for sensitivity rating of 100 dB or greater. (A decibel (dB) is a measure of sound intensity. The dB scale is logarithmic, meaning that a change of 10 dB represents a tenfold change in loudness. So, a sound measuring 20 dB is 10 times louder than a sound measuring 10 dB).


Impedance:
Impedance is measured in ohms. The higher the impedance, the more power required to produce sound. Lower numbers are better, particularly for portable headphones. Look for maximum impedance around 60 ohms. (Lower impedance players can compensate by using Headphone amp).


Standard Headphones Specifications (DENON AH-D650)

Equipment specifications are sometimes overstated, but in the case of headphones, they may be entirely misleading. It bears repeating that because headphones operate so close to the ears, the sound of a pair of headphones can depend on the shape of the listener's head and ears. Headphones with "good" specs may not sound good, and those with "bad" specs may not sound bad. However even an excellent pair of headphones can't overcome the lack of crossfeed found in natural stereo soundscape.


In part two of this article we will explain about:
1. Crossfeed

2. Burn in
3. Headphones amps
4. Analog vs. digital


I Hope you enjoyed this article, as much as I enjoyed writing it. Thanks for your time.





















Monday, June 1, 2009

Is it all in your head?



Greetings, everyone. :-)

I was perplexed by how AIWA presented their heads. I frequently came across definitions such as "Amorphous Head," "HX Head," "Narrow Gap Head," and so forth. Therefore, I've decided to resolve this technical puzzle and share the answers with anyone who might be interested because it's very confusing.

The World of Personal Stereo Hi-End Heads

Tape heads are the main sound element in every tape deck or portable stereo. The head has to have the capability of reproducing a wide range of frequency responses in the sound spectrum. It is then up to the amplifier to translate and replicate the sound quality. A high-quality head needs to be durable enough to last a long lifespan of use.

As long as you used high-quality tapes, good ferrite heads used to last a very long time. For instance, low-quality ferric oxide tapes are one of the most likely types to do damage to your head. Unlike most other head materials, ferrite is a ceramic material that has a high permeability, but it is comparable to the majority of other head materials. 

AKAI had special ferrite heads. They called these "glass" and "crystal" ferrite heads. Meaning, the housing of these heads was made out of glass, but they had ferrite cores laminated into them, making them highly durable.
AKAI's Super GX Head: Crystal & Glass Ferrite head

Permalloy heads, on the other hand, were extremely soft and would develop grooves pretty quickly. Plain Permalloy heads were almost always found on the majority of low-end decks. Permalloy is an alloy that consists of roughly 79% nickel and 21% iron.
Kenwood CP-G5 Standard Permalloy Head


Some decks, such as those made by Nakamichi with the "Crystal Permalloy" heads, were hard and lasted extremely well.
Nakamichi Dragon: Crystal Permalloy Head—hard combination


While most manufacturers used either Permalloy heads or some proprietary variation of them. Although they wear down rather quickly, these heads are easily resurfaced.

Aiwa's DX Head: Combination of Permalloy & Epoxy 

Sendust heads lasted significantly longer than average, were harder than most Permalloy heads, and had excellent magnetic performance. Sendust is a metallic alloy with high permeability composed of a certain proportion of silicon, aluminum, and iron.

Pioneer CT-F800 Sendust Head (notice the grooves on the head surface)


In the 1980s, the newest technology was amorphous heads, which are meant to last longer and wear more slowly than other types of heads. Additionally, compared to other head types, they have a wider dynamic range and clearer highs. Amorphous heads became the new standard for many head manufacturers.

Generally speaking, amorphous heads last far longer than Sendust heads, which is significantly longer than any Permalloy. It is also believed that amorphous materials are harder than crystalline ones of the same composition. Laser amorphous heads were precisely cut to improve surface contact with the tapes. Cutting an amorphous material precisely and accurately is very difficult without a laser.

A notable exception to the amorphous rule are the well-known AKAI GX heads, which were created using a combination of Glass and X'tal, hence the GX name. According to AKAI, they should last just about forever, and they don't groove like straight ferrite and permalloy heads. As a result, AKAI offered a 15-year warranty solely for the head.
Akai's GX Head: Crystal & Glass head illustration




AIWA's Golden Years


Following Panasonic's AX Amorphous Head RX-S40, RX-S41, and RX-S45 (1984) and the FG Amorphous Head (1989), and following Sony's WM-D6C (1984) and WM-DC2 (1985). AIWA, the market leader in personal headphones, introduced their first Amorphous Head in March 1989. 
Panasonic's RX-S40; AX Amorphous Head


Aiwa's Hi-End Heads come in three different versions and are exclusive to IC Logic Control units.

1. Amorphous Head.
2. Narrow Gap Head.
3. HX Head—Hyper eXtended Bass Head.

Amorphous Head: "PX303A (PX30, PX900) features an amorphous head, often found only in audiophile cassette decks, for a remarkable improvement in playback fidelity. Amorphous alloy displays exceptionally high maximum magnetic flux density, outstanding signal linearity, and minimal noise generation. Add to this a remarkable hardness for extra durability, and you have one of the finest heads available." (From Aiwa's catalog, 1989)

HX Head: "The HX head featured in the HS-PL303A uses a slightly peaked contact surface to achieve greater signal linearity, particularly in low bass frequencies, for clearer, more accurate signal reproduction." (From Aiwa's catalog, 1989)

The first AIWA portable stereo to have the triple-feature combination head, Amorphous-HX-Narrow Gap Head, was the iconic HS-PX303. Later, Amorphous Heads were just plain Amorphous or a combination of Amorphous & HX heads. The last one, a narrow gap head, was created by AIWA and improved upon from V1.0.

    AIWA's PX303 Amorphous-HX-Narrow Gap Head


Later on, AIWA produced various head combinations in specific models, such as
  • Amorphous Head is found only on JX707, RX70, and PX1000.
  • Narrow Gap Head found on the PX20, JX505, JL505, PX303, PL303, PL55 (V1.0), and TP38.
  • Combo: Amorphous—HX Heads Found on JX3000, JX2000, PX303, PX505, PL50, RL50, and RX50.
  • HX Head was found only on PL303, WR707, PL777, PL707, P705, and P505MkII.
Aiwa HS-PL70/HS-PL707 - Hard permalloy HX




AIWA Introduces their Bi-Azimuth Head Alignment System

In 1987, Sanyo introduced the first bi-azimuth, which they named "Double Azimuth." As with their JJ series, it was the first method of designing double-point pins azimuth. (Series 4, 5, 6, and beyond).
Sanyo JJ-P100 Bi-Azimuth Head System

Sanyo quoted, "In addition to the small, light, good pursuit of high sound quality. High fidelity plays with a double azimuth head. The playback head adopts a double azimuth head, which reproduces the sound recorded on the tape faithfully. For the headphone stereo, it is a small, high-performance mechanism. We also pursued a total dynamic quality, such as extending the playback ability of the low range using aluminum for the voice coil." (Automatic translation from Sanyo's Japanese Catalog 1988)

Aiwa's own simple concept of Bi-azimuth Head Alignment was promoted and described as follows: "This new feature automatically compensates for head alignment inaccuracies, which are common to auto-reverse tape drive systems with fixed heads. When the tape reverses direction, its position shifts slightly, causing a shift in azimuth, the relative angle of the tape to the head. In either tape direction, absolutely precise azimuth alignment is essential for optimum response, particularly in the high frequencies. To assure this, the Bi-azimuth Head Alignment automatically adjusts the head to the proper position relative to the tape in each direction. Bi-azimuth head alignment is found on selected higher-priced models." (From Aiwa catalog 1989)
AIWA's HS-PX30 with the Bi-Azimuth Head mechanism
An illustration of the Aiwa concept of bi-azimuth


Bi-azimuth is only found in the JX303, JX30, JL30, RX30, TX303, RL30, PL303, PX303, JL50, JL505, F50, and TP38 models. Additionally, it is present on early JX505, JX50, EX50, EX500, and JX2000 models that have the previous AIWA logo; Bi-Azimuth is no longer used in the new logo versions for JX2000 and JX505 models. See the attached photos.
Left: AIWA HS-JX2000 new logo without Bi-Azimuth. Right: JX2000 old logo with Bi-Azimuth.


Sony also attempted a different approach and invented the world's first portable stereo with a double-head design, the WM-EX909/FX909 (1992). It was an expensive approach, but everyone else was left far behind with their plastic-mounted heads and a poor, degrading sound.
Sony's WM-EX909 Dual Head Concept


Despite being the "inventor" of the Walkman, Sony lagged behind AIWA in a number of areas. By purchasing AIWA in 1992, Sony attempted to make up for that, which ultimately led to the demise of the greatest personal stereo leader. Sony Walkmans, however, will undoubtedly be remembered as the decade's most popular brand; this is still the company's biggest advantage to this day.

Be Good :-)
TheLion


This article was first published on the old Stereo2Go Forum, June 2011



Thank you for visiting.... 
The Personal Hi-Fi Site © All Rights Reserved 2025